- Large Capacity System with Blue Casing.
- Flow Rate 170 LPM.
- Built-in pressure relief
- Manufactured from FDA CFR-21 compliant materials
- Point-of-entry installation for whole home filtration
- Manufactured from FDA CFR-21 compliant materials
-
Large capacity system reduces sediment to help provide cleaner, clearer better tasting water by filtering out sediment and other contaminants from the water used throughout your entire home. The 3M Aqua-Pure™ Water Filter System is a whole-house water-filtration solution for larger homes and commercial units. It helps reduce particulate, rust, and the taste and odor of chlorine from cloudy, colored, or musty water. This simple canister filter system uses standard-size filtration cartridges. A built-in pressure relief button makes cartridge changes simple. By helping improve the clarity, taste and odor of tap water, it provides an economical alternative to bottled drinking water. The simple-to-install system handles a heavy load, providing a flow rate of up to 45 gallons (170.3 liters) per minute. The system is covered by a 1-year limited warranty against manufacturing defects. Manufactured by 3M Purification Inc., formerly CUNO Incorporated, the Aqua-Pure® AP802 Water Filter System is installed at the point-of-entry. The single canister unit is installed with 1-inch NPT inlet and outlet connections. All parts are manufactured from FDA CFR-21 compliant materials. The system provides a flow rate of up to 45 gallons (170.3 liters) per minute and has an operating pressure range of 25-100 psi (172-690 kPa) and operating temperature range of 40-100°F (4.4-37.8°C). It comes with a mounting bracket and wrench. A pressure relief button is incorporated into the system for ease in cartridge replacement. 3M recommends regularly scheduled maintenance. Cartridges must be replaced every six months, or sooner if there is a noticeable reduction in flow rate. If water is microbiologically unsafe or of unknown quality adequate disinfection should be used before or after the water filtration system. Whole-house water treatment systems are sometimes referred to as point-of-entry (POE) systems, and are installed immediately downstream from the water meter or well pump. A whole-house filter that reduces iron, particulate, and chlorine odor and taste will typically treat all water entering a residence, protecting plumbing and fixtures while reducing unpleasant tastes, colors and odors. A water softener system will often be bypassed by a cold drinking water line that provides salt-free drinking water. Regular maintenance of a whole-house water filter system may be as simple as replacing a filtration cartridge every six months, or may require a service call. The initial expense of a whole-house water filter system often pays off in the long term, as it may protect pipes and fixtures from iron and/or hard water deposits and discoloration and provide savings in bottled water costs. Features:
-
INDIA’S FIRST TANKLESS RO SYSTEM Uses World’s Best RO Membrane – Highest Level of Purification THREE STAGE PURIFICATION – I.M.P.A.C.T. | RO | UF – Stage 1: 3M Patented I.M.P.A.C.T. (Sediment, Rust, chlorine and VOCs) - Stage 2: RO Membrane (Calciuim, Magnesium, Fluoride ad Heavy Metals) - Stage 3: Compressed Sintered Activated Carbon Filter (Remove residual odour and Improve taste) EASY MAINTENANCE – Easy to change cartridges – No AMC Charge – Long Life Cartridges INDIVIDUAL CARTRIDGE MONITORING – EACH cartridge is monitored for current status and remaining life LOW NOISE DESIGN – Quiet Operation achieved by air suspension structure of pump design FEATURES: •3 Stage Purification : I.M.P.A.C.T. | RO | UF •Tank-less Design • World’s Best RO Membrane •Compact Design •Individual Cartridge Monitoring •Compact Under-the-Counter Design •Dedicated Faucet •Easy Maintenance with Sanitary Quick Change •Low Noise Design
-
3M Utility Specific Scale Inhibitor, AP430SS
- Binds calcium and magnesium hardness minerals, preventing them from precipitating out of solution and building up on metallic surfaces
- Contains food grade scale inhibitor
- Stainless Steel Head
- Can be used installed before any water using appliance for Scale Inhibition<l/i>
- Manufactured from FDA CFR-21
- Suitable for drinking and cooking water and all food application
-
3M Water Softeners
- Automatic Water Softener, 60Kg Salt Capacity
- Designer Series Water Softener : Sleek and State of the art compact single tank design
- Very high resin life & minimal service requirements.
- Intelligent Control Valve : Centralised controlling system for operational ease.
- User Interface : Ease of checking the operating status. Simplifies the installation & debugging process
- Built-in Automatic Bypass Valve
- High capacity salt storage to minimise frequency of salt refilling cycle
- Sliding cover convenient for operation & maintenance
- As per NSF & WQA standards
- Ease of installation
-
SFT Series Automatic Water Softener, 60Kg Salt Capacity Install and Forget With 3M Water Softeners, all you need to do is plug it in! With the auto-regeneration feature, our water softeners bring you maximum quality, with minimum intervention. Complete Control 3M Water Softners gives you complete control with the NSF-listed, globally best-in-class, High-Quality Control Valve (operation based on time and flow rate along with a built-in bypass valve). The quality control valve ensures minimal repairs & detailed information for diagnosis Reliable Resin 3M Water Softeners use high-efficiency and high-performance food-grade resin. A built-in strainer prevents any resin leakage, eliminating the frequent need to top up the resin. The resins have an average life of 7-8 years, much higher than others available in the market. Inspiring Design The arc barrel body design is both aesthetic and practical. 3M Water Softeners are equipped with a damping cover for ease of access and a premium user experience. With effective space utilization, they are a perfect fit for the modern home. “A one-time investment to protect you from hard water effects”
